TJM XGS Panhard Rods

The purpose of suspension is to allow the wheels to move vertically with respect to the body, when raised height suspension is applied to some coil-sprung 4WD vehicles the fixed length of the original front or rear panhard rod can cause the axle to shift allowing it to move forward and backwards, or from side to side. TJM Adjustable Panhard Rods are designed to eliminate this problem by enabling you to set the rod to the most appropriate position for whatever suspension type or lift height your 4WD has.

TJM XGS Castor Correction Kits & Bushes

Negative castor is produced when raised height suspension is applied to the vehicle. Negative caster is when the top of the steering axis is tilted forward (steering axis intersects the ground behind the tyre contact patch). Often negative castor will produce undesirable driving characteristics such as vague steering, under steer and straight line stability, to permanently correct this TJM have developed a range of castor correction kits and bushes to suit many vehicles.

TJM XGS Sway Bar Links Pins

A sway bar is a torsion bar mounted laterally on suspension and is designed to reduce side sway. The sway bar transfers movement from one side of the suspension to the other. This is done through the connection of a torsion bar to each side of an axle by sway bar links.

TJM XGS Greasable Shackles

TJM XGS Greasable Shackles make the relatively messy and time consuming task of bush lubrication incredibly easy. A greased shackle pin greatly reduces friction and operating temperatures and prolongs the life of the bush. However, grease will dissipate over time and it therefore necessary to re-grease. Standard shackles make this an arduous task but TJM XGS Greasable Shackles and pins allow the greasing of bushes without the need to remove the springs.

Available for most leaf spring vehicles, TJM XGS Greasable Shackles are heavy duty replacement components made to exacting tolerances and nickel plated for long service life.

TJM XGS U-bolts

When springs are installed on a vehicle, quite often the existing U-bolts are re-used, which could create a potentially dangerous situation. If the original U-bolt is re-used the pitch of the thread may be stretched and the U-bolt nut may loosen allowing the spring pack to become loose. It is advisable to replace U-bolts when new springs are installed. TJM XGS U-bolts are matched in length to the TJM XGS Leaf Spring range to accommodate the increased stack height of the TJM XGS Spring.

TJM XGS POLYURETHANE BUSHES
The TJM XGS Polyurethane Bushes offer longer life when compared to rubber bushes. They ensure positive location of suspension components leading to direct responsive steering, low maintenance and improved stability. TJM offers a wide range of bush kits including Leaf Spring, Shock Absorber, Panhard Rod and Control Arm Bushes.

TJM XGS COIL SPRING SPACERS
Available for many makes and models are TJM's durable polyurethane coil spacers.

TJM XGS RUBBER BOOTS
Keep the dust and dirt out away from your shocks with a TJM XGS Rubber boot. Available in yellow, black and gray.

TJM XGS BRAKE LINE EXTENSION KIT
A TJM XGS Brake Line Extension Kit is essential when lifting your 4WD anywhere from 4 inches and above